Extra Duty Stripper
DESCRIPTION
Designed for use on any water based finish, this stripper is effective for floor care programs where there is more time than normal between strippings, creating an extensive build-up of finish. Will emulsify and suspend water based floor finishes to be picked up easily.
DIRECTIONS
Sweep or dust mop the floor to remove any debris. Dilute stripper 1:4 with cold or mildly warm water.
The optimum use-dilution will depend on the age and buildup of the floor finish. Apply the stripping solution liberally using a mop or automatic scrubber. Allow to stand for at least 5 minutes. Do not allow the stripper solution to dry. Be sure to completely cover floor to baseboards. Scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Pick-up the solution and old finish with a wet vacuum, automatic scrubber, or clean mop. Rinse thoroughly with clean cold water.
NOTE: Wet floor may become extremely slippery. Be sure to keep pedestrian traffic away from floor until thoroughly dry